Sound-Active; Service Mode; Hidden Menu Map - Chauvet The Intimidator Scan LED 200 User Manual

Sound-Active

Service Mode

Hidden Menu Map

4. Operating Instructions
This fixture has a preprogrammed, sound triggered chase.
Access this via the control panel on the front of the fixture. Adjust the microphone sensitivity from
the control panel. Please see the chart below for further explanation.
1. Press <MODE/ESC> until one of the standalone modes appears on the LED screen
(SLAv, NStS, NAFA, NASL).
Using <UP> and <DOWN>, select NStS.
2.
3. Press <ENTER>.
The microphone will only respond to low frequencies (bass).
This fixture has a hidden menu. The purpose of this menu is to adjust the home position
(electronic adjustment) of the attributes listed below.
M
AIN
F S
UNCTION ELECTION
000~255
P128
000~255
t128
G128 000~255
C128 000~255
H128 000~255
Y128 000~255
Please see the instructions below to access this hidden menu:
1. Press < MODE/ESC > for at least 10 seconds.
2. Using <UP/DOWN>, enter the following pass code: "2323". Press <UP> to change the
blinking digit in ascending order, and press <DOWN> to move on to the next digit.
3. Press <ENTER>.
This mode will be automatically terminated after 15 seconds of being idle.
I
NSTRUCTION
Adjustment for pan
Adjustment for tilt
Adjustment for the gobo wheel
Adjustment for the color wheel
Adjustment for pan
Adjustment for tilt
11 12/9/2010 10:32 AM