ABLE OF ONTENTS 1. Before You Begin................3 What Is Included ................... 3 Unpacking Instructions .................. 3 Claims ........................3 Text Conventions ..................3 Icons ......................3 Document Information ........Error! Bookmark not defined. Product at a Glance ..................4 Safety Notes ....................4 2.
If the box or the contents appear damaged from shipping, or show signs of mishandling, upon receipt notify the carrier immediately, not CHAUVET®. Failure to do so in a timely manner may invalidate your claim with the carrier. In addition, keep the container and all the packing material for inspection.
Product at a Use on Dimmer Auto Programs Glance Outdoor Use Switchable voltage (120 V / 230 V) Sound Activated Replaceable Fuse User Serviceable Master/Slave Duty Cycle Safety Notes Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about installation, usage, and maintenance.
2. I NTRODUCTION Product Overview Voltage Switch Bracket Adjustment Knob Power In DMX In DMX Out Power Out Fuse Holder Intimidator™ Barrel LED 300 User Manual (Rev. 5) Page 5 of 18...
3. S ETUP AC Power The Intimidator™ Barrel LED 300 has a dual voltage power supply and it can work with an input voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the position of the voltage selection switch.
The power linking diagram shown above corresponds to the North American version of the product ONLY! If using the product in other markets, you must consult with the local CHAUVET® distributor as power linking connectors and requirements may differ in your country or region.
Mounting Before mounting the product, read and follow the safety recommendations indicated in Safety Notes. Orientation The Intimidator™ Barrel LED 300 may be mounted in any position; however, make sure adequate ventilation is provided around the product. • Rigging Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
4. O PERATION Control Panel To access the control panel functions, use the four buttons located underneath the display. See the Product Overview to see the button locations on the control panel. Operation Button Function Press to find an operation mode or to back out of the current menu <MENU>...
Configuration Set the product in one of the standalone modes to control without a DMX controller. Connect the product to a suitable power outlet. (Standalone) Turn the product on. Never connect a product that is operating in any standalone mode to a DMX controller.
Master/Slave The Master/Slave mode allows a single Intimidator™ Barrel LED 300 unit (the “master”) to control the actions of one or more Intimidator™ Barrel LED 300 units (the “slaves”) Mode without the need of a DMX controller. The master unit will be set to operate in either Automatic or Sound Active mode, while the slave units will be set to operate in Slave Mode.
5. T ECHNICAL NFORMATION Product Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and mechanical wear. To maintain optimum Maintenance performance and minimize wear, you should clean your lighting products at least twice a month.
If you live in the U.S., contact CHAUVET® World Headquarters (see below). • If you live in the UK or Ireland, contact CHAUVET® Europe Ltd. (see below). • If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your distributor of record.
6. T ECHNICAL PECIFICATIONS Dimensions and Length Width Height Weight Weight 20.5 in (521 mm) 10 in (255 mm) 6.7 in (171 mm) 14.2 lbs (6.4 kg) Note: Dimensions in inches rounded to the nearest decimal digit. Power Power Supply Type Range Voltage Selection Switching (external)