Table of Contents
Advertisement
1.3 Development and Evaluation Tools
1.3.1 Development Kit
The Development Kit contains the hardware and software needed to use the RCM3700.
• RCM3700 module.
• RCM3700 Prototyping Board.
• Universal AC adapter, 12 V DC, 1 A (includes Canada/Japan/U.S., Australia/N.Z.,
U.K., and European style plugs).
• Programming cable with 10-pin header and DE9 connections, and integrated level-
matching circuitry.
• Cable kits to access RS-485 and analog input connectors on Prototyping Board.
• Dynamic C CD-ROM, with complete product documentation on disk.
• Getting Started instructions.
• Accessory parts for use on the Prototyping Board.
• Rabbit 3000 Processor Easy Reference poster.
• Registration card.
RabbitCore RCM3700
The RCM3700 RabbitCore module features built-in built-in Ethernet and onboard mass storage (serial
flash) in addition to 33 I/O lines. These Getting Started instructions included with the Development Kit
will help you get your RCM3700 up and running so that you can run the sample programs to explore its
capabilities and develop your own applications.
Development Kit Contents
The RCM3700 Development Kit contains the following items:
RCM3700 module.
Prototyping Board.
Universal AC adapter, 12 V DC, 1 A (includes Canada/Japan/U.S., Australia/N.Z., U.K., and European
style plugs).
Programming cable with 10-pin header and DB9 connections, and integrated level-matching circuitry.
Cable kits to access RS-485 and analog input connectors on Prototyping Board.
Dynamic C CD-ROM, with complete product documentation on disk.
Getting Started instructions.
Accessory parts for use on the Prototyping Board.
Rabbit 3000 Processor Easy Reference poster.
Registration card.
Visit our online Rabbit store at
www.rabbit.com/store/
for the latest information on peripherals and acces-
sories that are available for the RCM3700 RabbitCore modules.
®
Step 1 — Install Dynamic C
Before doing any development, you must install Dynamic C. Insert the CD from the Development Kit in
your PC's CD-ROM drive. If the installation does not auto-start, run the setup .exe program in the root
directory of the Dynamic C CD. Install any Dynamic C modules after you install Dynamic C .
Rabbit and Dynamic C are registered trademarks of Digi International Inc.
RabbitCore RCM3700 User's Manual
Figure 1. RCM3700 Development Kit
7
Advertisement
Table of Contents
