Table of Contents
Advertisement
The RCM3700 is a compact module that incorporates the latest
revision of the powerful Rabbit
memory, onboard serial flash, static RAM, and digital I/O ports.
Throughout this manual, the term RCM3700 refers to the complete series of RCM3700
RabbitCore modules unless other production models are referred to specifically.
The RCM3700 has a Rabbit 3000 microprocessor operating at 22.1 MHz, static RAM,
flash memory, two clocks (main oscillator and real-time clock), and the circuitry necessary
for reset and management of battery backup of the Rabbit 3000's internal real-time clock
and the static RAM. One 40-pin header brings out the Rabbit 3000 I/O bus lines, parallel
ports, and serial ports.
The RCM3700 receives its +5 V power from the customer-supplied motherboard on
which it is mounted. The RCM3700 can interface with all kinds of CMOS-compatible
digital devices through the motherboard.
The Development Kit and the Ethernet Connection Kit have what you need to design your
own microprocessor-based system: a complete Dynamic C software development system
with optional modules and a Prototyping Board that acts as a motherboard to allow you to
evaluate the RCM3700 and to prototype circuits that interface to the RCM3700 module.
1.1 RCM3700 Features
• Small size: 1.20" x 2.95" x 0.98"
(30 mm x 75 mm x 25 mm)
• Microprocessor: latest revision of Rabbit 3000 running at 22.1 MHz supports Dynamic C
Secure Sockets Layer (SSL) module for added security
• 33 parallel 5 V tolerant I/O lines: 31 configurable for I/O, 2 fixed outputs
• External reset I/O
• Alternate I/O bus can be configured for 8 data lines and 5 address lines (shared with
parallel I/O lines), I/O read/write
• Ten 8-bit timers (six cascadable) and one 10-bit timer with two match registers
• 512K flash memory and 512K SRAM (options for 256K flash memory and 128K SRAM)
RabbitCore RCM3700 User's Manual
1. I
NTRODUCTION
®
3000 microprocessor, flash
4
Advertisement
Table of Contents
