Table of Contents
Advertisement
5.2.4 Serial Communication Drivers
Library files included with Dynamic C provide a full range of serial communications sup-
port. The
library provides a set of circular-buffer-based serial functions. The
RS232.LIB
library provides packet-based serial functions where packets can be delimited
PACKET.LIB
by the 9th bit, by transmission gaps, or with user-defined special characters. Both libraries
provide blocking functions, which do not return until they are finished transmitting or
receiving, and nonblocking functions, which must be called repeatedly until they are fin-
ished, allowing other functions to be performed between calls. For more information, see
the Dynamic C Function Reference Manual and Technical Note TN213, Rabbit Serial
Port Software.
5.2.5 Serial Flash
The serial flash drivers are located in the
folder. Complete informa-
LIB\SerialFlash
tion on these function calls is provided in the Dynamic C Function Reference Manual.
5.2.6 TCP/IP Drivers
The TCP/IP drivers are located in the
folder. Complete information on these
LIB\TCPIP
libraries and the TCP/IP functions is provided in the Dynamic C TCP/IP User's Manual.
RabbitCore RCM3700 User's Manual
59
Advertisement
Table of Contents
