It is recommended that you allow for an "exclusion zone" of 0.04" (1 mm) around the
RCM3700 in all directions when the RCM3700 is incorporated into an assembly that
includes other printed circuit boards. An "exclusion zone" of 0.16" (4 mm) is recom-
mended below the RCM3700 when the RCM3700 is plugged into another assembly using
the shortest connectors for header J1. Figure A-2 shows this "exclusion zone."
2.950
(74.9)
0.04
0.04
(1)
(1)
Exclusion
Zone
1.200
0.04
0.04
(30.5)
(1)
(1)
Figure A-2. RCM3700 "Exclusion Zone"
RabbitCore RCM3700 User's Manual
79