Table of Contents
Advertisement
The following options require more care in address selection and testing actions, as
conflicts with other users, servers and systems can occur:
Connect the RCM3700 module's Ethernet port to an existing LAN, preferably
•
LAN —
one to which the development PC is already connected. You will need to obtain IP
addressing information from your network administrator.
WAN —
The RCM3700 is capable of direct connection to the Internet and other Wide
•
Area Networks, but exceptional care should be used with IP address settings and all
network-related programming and development. We recommend that development and
debugging be done on a local network before connecting a RabbitCore system to the
Internet.
TIP: Checking and debugging the initial setup on a micro-LAN is recommended before
connecting the system to a LAN or WAN.
The PC running Dynamic C does not need to be the PC with the Ethernet card.
3. Apply Power
Plug in the AC adapter. The RCM3700 module and Prototyping Board are now ready to
be used.
RabbitCore RCM3700 User's Manual
62
Advertisement
Table of Contents
