Table of Contents
Advertisement
B RAKES
8. Diagnostics Chart with Trouble Code by ASS Warning light
CHECK OPEN CIRCUIT I N CONTROL CIR
8X12
CUIT OF RELAY BOX.
1 ) Remove valve relay from relay box.
2) Measure resistance between motor relay in stalling
point and valve relaj installing pOint.
Connector
Motor relay installing point No. 86
<§:�c3>
installing point No. 30:
:
B4M0894
Is the resistance less than 0.5 n?
�
Go to step
:
Replace relay box.
CHECK OPEN CIRCUIT IN CONTROL CIR
8X13
CUIT OF RELAY BOX.
Measure resistance between motor relay installing pOint
and relay box connector.
Connector
Motor relay installing point No. 86
:
Is the resistance less than 0.5 n?
�
Go to step
Replace relay box.
CHECK GROUND SHORT IN CONTROL C I R
8X1 4
CUIT OF RELAY BOX.
Measure resistance between relay box and chassIs
g ro un d .
Connector
Motor rela y installing point No. 86
Motor relay installing point No. 85
:
(�s)
Is the resistance more than 1 Mn?
�
Go to step
:
Replace relay box. Check fuse No. 1 9.
1 09
&
terminal
8X1 3.
&
terminal ·
8X1 4.
&
terminal
8X1 5.
4-4
[T8X14j
-
Valve relay
- (
)
ABS4
No. 4:
-
Chassis ground:
-
Chassis ground:
Advertisement
Table of Contents
