1-3
[01G3)
1 .
General Precautions
WARNING:
•
Secure a rope or wire to the front and rear
towing or tie-down hook to prevent the lat
eral runout of front wheels.
•
Do not abruptly push down on accelerator
pedal during tests even when engine is oper
ating at low speeds since this may cause
vehicle to jump off test machine.
•
Avoid abrupt braking.
Tester rollers
3.
BRAKE TEST
1 )
Place vehicle onto brake tester.
2)
Perform brake tests.
('_
,_
I
,
...
.... .
,
NOTE
•
Ensure front or rear wheels are in contact with
the ground during tests.
•
If dragging force exceeds specifications,
check brake pad or shoe for dragging.
GENERAL INFORMATION
4. TOWING
1 )
CAUTION
•
truck whenever possible.
•
apply the parking brake.
Free rollers
B1H0002A
2)
CAUTION:
•
train and all wheels are operating properly.
•
not tow for more than
•
•
position while the vehicle is being towed.
•
steering will not work when the engine is
"OFF". You will have to use greater effort for
the brake pedal snd steering wheel.
•
differential oil levels and top up to the speci
fied level if necessary.
B1H0003
8
Loading vehicle onto dolly or flat -bed truck
Transport vehicle using a dolly or flat-bed
Place the selector lever in "P" position and
Flatbed
Towing dolly
Towing with rope
Tow vehicle with a rope only when power
30
Never exceed
km/h (19 MPH). Also, do
Place the selector lever in "N" position.
The ignition switch should be in the " ACC"
Remember that brake booster and power
Before towing, check transmission oil and
truck
B1HOOO5A
10
(6
km
miles).
B1H0006