Table of Contents
Advertisement
3)
Towing with front or rear wheels raised
CAUTION:
Do not tow vehicle with front or rear wheels
raised under any circumstances since this
will damage bumper.
GEN ERAL INFORMATION
G : TURBO AT MODELS
1 )
1 . SPEEDOMETER TEST (Jack-up method)
between rollers of speedometer test machine.
2)
floor, s upport with safety stands.
3)
(for added safety) .
4)
WARNING:
•
81 H0006
towing or tie-down hook to prevent lateral
.. unout of front wheels.
•
pedal during tests even when engine is oper
ating at low speeds since this may cause
vehicle to jump off test machine.
•
•
ping due to vibration, do not place any
wooden blocks or similar items between the
safety stands and the vehicle.
•
do not place anything near them. Also, make
sure that nobody gets in front of the vehicle.
2. SPEEDOMETER
method)
1 )
81HOO10
between rollers of speedometer test machine.
2)
with centerline of rear wheels on floor.
3)
rollers are aligned with mark described in step
2 above.
4)
5)
7
Position vehicle so that front wheels are
Jack u p vehicle until rear wheels clear the
Start engine with selector lever set in "2nd."
Perform speedometer tests.
Secure a rope or wire to the front and rear
Do not abruptly push down on accelerator
Avoid abrupt braking after tests.
In order to prevent the vehicle from slip
Since the rear wheels will also be rotating,
Tester rollers
Position vehicle so that front wheels are
Make an alignment mark corresponding
Back up vehicle so that centerline of free
Drive vehicle onto free rollers.
Perform speedometer tests.
[01G2)
1-3
1
General Precautions
.
Safety stand
81H0001A
TEST
(Free
roller
Advertisement
Table of Contents
