Language Setting; Image Server Setting - JVC VR-N900U Instructions Manual

Applications

Language Setting

Let you specify the language you want to use.
The function of the button and the GUI (graphical user
interface) are the same as the [Language Selection] window
that is displayed when the recorder is first switched on.
When setting the language, shut down the VR-N900 Viewer.
1
Select [Language Setting] in the Main Menu.
• The [VR-N900 Language Selection] window is displayed
when the VR-N900U is switched on for the first time. Click
the [?] button and select the language you want to use in
the [VR-N900 Language Selection].
• Click the [OK] button to enable your choice. The system
will reboot when the language setting is changed.
• Click the [Cancel] button to cancel.
[VR-N900 Language Selection] window
CAUTION
• As for language setting, immediately set the language
after the VR-N900U startup.
• When language setting
automatically reboots.
required to finish.
• Set the language after shutting down the Viewer.
• Never turn off the power while setting the language.
64
is finished, the
Approximately 5 minutes

Image Server Setting

Lets you specify settings for connecting the VR-N900U to a
computer and for displaying the [Live Viewing] window and
[Browse] window.
CAUTION
• The Image Server settings apply to operations in the [Live
Viewing] window, [Browse] window and [Screen Setup]
window on the VR-N900U.
device
is
[ImageServer Administrator] window
1
Select [Image Server Setting] in the Main Menu.
This will open the [ImageServer Administrator] window.
The [ImageServer Administrator] window is divided into five
sections.
● Server Configuration Section
This section is used for specifying the server name and port
and for enabling optional external access to the server.
Name:
Lets you specify a name for the server. By default, the
name is simply [Server].
Port:
Lets you specify a port number to use for the server.
Enable Outside Access:
Select this check box to enable access to the VR-N900U
from a surveillance computer connected to the internet via
router or firewall.
If this option is selected, specify the global IP address in
the [IP address] column of the router or firewall for
Internet, then specify the port number in the [Port] column
to have the surveillance computer access to the internet.