Viewing Live Images; Display The [Live Viewing] Window; Selecting A View; Selecting A Camera - JVC VR-N900U Instructions Manual

Basic Operation

Viewing Live Images

Display the [Live Viewing] window

1
Press the [LIVE/BROWSE] button or select
[Live Viewing] in the Main Menu.
• The VR-N900 Viewer starts up and the [Live Viewing]
window appears.
• If the setup window is displayed, close the setup window.
• If the [Browse] window is displayed, press the [LIVE/
BROWSE] button.
• The window switches between the [Live Viewing] window
and the [Browse] window each time the [Live Browse]
button is pressed.
• You can also click the [Live] tab with the mouse.
• To close the [VR-N900 Viewer] window, click the [Close]
button.
[Live] tab
[Views] section
[View] list
[Live Viewing] window
• If you enter settings in the [Camera Record Setting]
window without closing the [Live Viewing] window, live
images may not appear immediately after the camera
settings have been completed. In this case, [Unable to
connect to the server! Reconnecting to the server] or
[Unable to connect to 127.0.0.1:80 on the device name
(camera name)! Reconnecting to the server] appears on
the [Live Viewing] window (127.0.0.1:80 is an internal IP
address of the VR-N900U).
Note
• Depending on the condition of the network circuit, it may
take some time until images from the camera are
displayed.
• Depending on the connection of the additional hard disk,
several minutes may be required for the [Live Viewing]
window to display.
12

Selecting a View

For details of creating views, refer to "Screen Setup".
☞
( Page 30)
1
Press the [PTZ/PRESET] button until the [PTZ/
PRESET] indicator blinks.
The [PTZ/PRESET] indicator switches between lit and
blinking each time the [PTZ/PRESET] button is pressed.
2
Press the [ZOOM IN/ENTER] or [ZOOM OUT/
CANCEL] button to select a view.
Note
If you connect a mouse, you are able to select a view in two
ways:
• By selecting the required view in the [Views] section.
• By selecting the required view from the [Views] list located
in the upper part of the window.
CAUTION
[Close] button
• Make sure not to set the changeover of the view with short
intervals.
• When live image is not displayed with VN-C625/VN-C655,
reset the password of the camera and VR-N900U. As for
setting method, refer to the Instruction Manual that came
with the camera and setting method of the root password of
the [Edit Device Setting] window of this book (
• When returning from a [Setup] window to [Live], the audio
settings becomes [None]. Please set the audio again.

Selecting a Camera

1
Press the [SELECT] button to set the keypad to
selection mode.
The [SELECT] indicator will light up.
2
Enter the camera number with the keypad.
• If you press the same camera number twice, images from the
camera will be enlarged.
• To return to normal view, press the same camera number
once more.
• If you press a different camera number while images are
enlarged in the view, live images from the selected
camera will be enlarged. The multiple screen display may
briefly appear when camera selection is changed in
enlarged view.
• You can also click the bar at the top of the live image of a
particular camera with the mouse to select the image.
☞
Page 41).