Switching Operation On/Off By The Rear Input/Output Terminals; Switching Operation On; Switching Operation Off; Login - JVC VR-N900U Instructions Manual

Switching Operation On/Off by
the Rear Input/Output Terminals
• For details on the rear input and output terminal layout,
refer to "Rear I/O Terminals" (Page 9) in the STARTUP
GUIDE.

Switching Operation On

1
(With operation off status) Press the [OPE ON/
OFF] button.
• The [OPERATE] indicator will blink.
• The [OPERATE] indicator will light up, indicating that the
system is operable.

Switching Operation Off

1
(With operation on status) Hold down the [OPE
ON/OFF] button for approximately 2 seconds.
• The [OPERATE] indicator will blink.
• The screen will go blank and the [OPERATE] indicator will
go off, indicating that operation has been turned off.
CAUTION
• Do not turn off the power until operation has been turned
off.

Login

If [Auto Login] is set to [Off], the [Login] window will appear
after the system activates. Use the keypad to enter your
password and press the [ZOOM IN/ENTER] button.
Note
• You can set [Auto Login] to [On] or [Off] from [Unit Setting]
☞
in the Main Menu. (
[Login] window
Page 58)
9