Using Html Pages; Adjusting Camera Settings - JVC VR-N900U Instructions Manual

Using HTML Pages

1
Click [Html Page] in the [System Overview]
section.
[Html Page]
2
Drag and drop the [Html] icon to the required
position.
The [Open URL] window will appear.
[Open URL] window
3
Type the URL and click the [OK] button.
4
Select the HTML page in the view and specify
its properties in the [Properties] section.
Url:
Click the [New] button to specify a new URL.
Scaling:
Select the required scaling of the HTML page.
Enable HTML scripting:
Select this check box to specify HTML files that contain
navigation or trigger functions.
CAUTION
• Pages containing such content as ActiveX and Flash will
not be supported.
• Please do not install the ActiveX.
• Note that some links may involve security issues.
[Screen Setup] window

Adjusting Camera Settings

1
Select the camera you want to adjust in the
[Screen Setup] window.
2
Select [Properties] with the mouse.
3
Adjust the following camera settings when
necessary.
Camera Name:
Displays the name of the selected camera. The field is
read-only.
Image Quality:
Always select [Full] for the adjustment of the image quality
and resolution of the images that are displayed.
Frame Rate:
Sets the recording frame rate for the selected camera.
The default setting is [Unlimited].
Maintain Image Aspect Ratio:
If this check box is selected, images will not be stretched
to fit the size of the camera position. Rather, images will
be displayed with the aspect ratio with which they have
been recorded.
Update on Motion:
If this check box is selected, the camera's images will only
be updated on the [Live Viewing] window when motion is
detected.
Sound on Motion Detection:
When images from the camera are viewed on the [Live
Viewing] window, it is possible to get a simple sound
notification when motion is detected.
Always off:
Do not use sound notifications on detected motion.
Always on:
Play a sound notification each time motion is detected
on the camera.
Sound on Event:
When images from the camera are viewed on the [Live
Viewing] window, it is possible to get a simple sound alert
when events related to the selected camera occur. Being
able to use this feature requires that notifications on
events have been configured. (
[Screen Setup] window
☞
Page 52)
35