Playing Back Recorded Images - JVC VR-N900U Instructions Manual

Basic Operation
Playing Back
Images
CAUTION
• The recording frame rate may decline when using the
[Live Viewing] window.
• For the area(s) that do not support the Daylight Saving Time
(DST). If DST is entered, the sections where a change to
DST is made may not be properly played back or searched.
• When the recording and recorded image is simultaneously
played back, and access to the hard disk occurs
frequently, the image which is played back may pause and
the audio may break up. (There is no effect to the
recording in the system or the additional hard disk.)
• When returning from the [Setup] window to the [Browse]
window, the audio settings becomes [NONE]. Please
select the audio source again.
●Display the [Browse] window
1
Press the [LIVE/BROWSE] button or select
[Live Viewing] from the Main Menu.
The VR-N900 Viewer starts up and the [Live Viewing] window appears.
2
When the [Live Viewing] window appears, press
the [LIVE/BROWSE] button again.
The window switches between the [Live Viewing] window
and the [Browse] window each time the button is pressed.
[Live Viewing] window
16
Recorded
[Views] section
[Sequences] section
[Alerts] section
[Time navigation] section
[Audio] section
[Smart Search] section
[Export] section
• It may take a few minutes until the [Browse] window is
displayed.
• If you enter settings in the [Camera Record Setting]
window without closing the [Browse] window, recorded
images may not be displayed immediately after the
camera settings have been completed. In this case,
[Unable to connect to the server! Reconnecting to the
server] or [Unable to connect to 127.0.0.1:80 on the
device name (camera name)! Reconnecting to the server]
appears on the [Browse] window (127.0.0.1:80 is an IP
address of the VR-N900U).
• If you play back a recorded image that is not recorded at
all, [Connection: [N900] Camera1 on 127.0.0.1:80] will
display continuously in the [Browse] window.
• To close the VR-N900 Viewer, click the [Close] button.
Note
• You can also click the [Browse] tab with the mouse.
• Each image bar features an online indicator, which is
useful when browsing the recordings. The indicator lights
up green each time a new image is displayed.
• Recorded images are saved as a database. Recorded
image data is called the database in this device.
• When [Before Database Start] appears on the [Browse]
window, no database (recorded image) exists in prior to
the current image viewed.
• When [After Database End] appears on the [Browse]
window, no database (recorded image) exists after the
current image viewed.
• Make sure not to set the changeover of the Live and
Browse at short intervals.
CAUTION
• If several sections are opened in the left side of the [Live
Viewing] window, it may not be possible to display them all
in the window. If this happens, double-click the section
bars and close the sections.
[Close] button
[Browse] window