Decorative Tucks - Bernina artista 170 QPE/180 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
• Draw 4 lines about ¼" apart, across the width of the fabric.
• On the first line - create a tuck, about ¼", using a decorative stitch.
• On the second line - sew a ¼" tuck using a metallic thread with a straight stitch.
• Cord the edge of this tuck with a metallic cord as in Section C - Corded Edge.
• On the third line create an inverted tuck with lace inserted into it.
- Place the edge of the lace against the drawn line, on the right side, and baste in place.
- Fold the fabric over the lace and press.
- Using Edgestitch Foot #10/10C, place the pressed fold against the left side of the center blade
- Move needle position to the left enough to catch the lace; stitch to the left of the basting line.
- Open out and press again.
• On the fourth line insert the lace with the tuck.
- Fold wrong sides together and press the last tuck.
- Place the edge of the lace in from the fold a scant ¼".
- Using Foot #37 - the ¼" foot - stitch a tuck, catching the lace as you sew.
- Press the tuck toward the lace.
BERNINA
M Y
ASTERING OUR
BERNINA

DECORATIVE TUCKS

Fabric:
Needle:
Thread:
Presser Foot:
1/10/02
®
®
artista 170 QPE/180
Medium weight cotton, 8" x 4"
80/12 Embroidery
30 wt. Cotton Embroidery,
Metallic, and matching cord
Depends on technique
artista 170 QPE/180/73