Bernina artista 170 QPE/180 Owner's Workbook page 103

M
ASTERING
Y
OUR
BERNINA
®
Row #1 - Sewing Speed
• Select Straight Stitch #1; sew down the 9" length of the fabric.
• Change speeds as you sew.
• The 180 has 4 speeds.
• Changing the speed using the Setup Program
Row #2 - Needle Stop
• Engage the Needle Down function.
• Sew half way down, stop, use the foot control to raise the needle.
• Sew the rest of the way and stop once more. The machine stops instantly without coasting.
• The Clr function does not affect the needle up/down function.
Row #3 - Reverse Sewing
• Select the Running stitch #4 - sew about 1". Raise the foot and move the fabric to the left about ¼".
• Select the Reverse Sewing function and continue stitching back to the beginning.
• Cut the threads and position the fabric about 1" below what was just stitched.
• Disengage Reverse Sewing.
• Select stitch #1. Sew about halfway and engage the Reverse Sewing function. The reverse stitches
are the same length as the forward ones and the machine tracks perfectly.
• Touch Clr to cancel alterations.
Row #4 - Basting
• Select Long Stitch; it sews every second stitch with a maximum length of 10mm.
• Sew halfway down using the preset length; stop and change to the mximum length.
• Sew the remainder of the way.
• Touch Clr to cancel the alterations.
Row #5 - Automatic Basting
• Select Stitch #1; sew about 3-4 stitches.
• Select Basting Stitch #21.
• Sew to within ½" of the end and select Stitch #1 again.
BERNINA
M Y
ASTERING OUR
BERNINA
PROGRAMMING PIZZAZZ
Function Sampler
Fabric: Muslin, 12" x 9"
Stabilizer: Tear-away as needed
Needle: 90/14 Universal
Thread: 30 wt. cotton embroidery
in a contrasting color
Presser Feet: Reverse Pattern Foot #1/1C and
Open Embroidery Foot #20/20C
1/10/02
®
®
artista 170 QPE/180
artista 170 QPE/180/103