Bernina artista 170 QPE/180 Owner's Workbook page 15

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.____
• Fold fabric to 3" x 6".
• Select stitch #407.
• Sew a row of stitching as programmed down the center of the sample.
• Alter stitch length to 1mm and sew a 2nd row on one side of the first row.
• Touch CLR - this clears alterations made to the selected stitch only.
• Select stitch #2 - (the one used for satin stitching in the previous exercise).
Notice the computer remembered all the changes made to the stitch.
• Select stitch #407 again.
• Alter stitch width to 3.5mm (170 QPE) or stitch 6mm (180) and sew a 3rd row on
the other side of the first row.
• Touch CLR ALL- notice the alterations made are gone.
• Select stitch #2 again - notice the changes made to it are gone also. CLR ALL
returns all stitch alterations back to default settings.
• The computer will remember any and all stitches you alter, as long as the clear
buttons are not used and as long as the machine is not turned off.
RETURNING TO BASIC SETTINGS
• Three options:
BERNINA
M Y
ASTERING OUR
BERNINA
ALTERED MEMORY
Fabric:
Needle:
Thread:
Presser Foot:
1. Press the external CLR button
2. Touch the CLR ALL function.
3. Manually set changes back to the basic mark
1/10/02
®
®
artista 170 QPE/180
Firm fabric – 6" x 6"
90/14 Embroidery
30 wt. cotton embroidery
Reverse Pattern Foot #1/1C
artista 170 QPE/180/15