Bernina artista 170 QPE/180 Owner's Workbook page 48

M
ASTERING
Y
OUR
BERNINA
®
STITCH COUNTER BUTTONHOLES
Owner's manual pg.____
• Fold the fabric in half to 3" x 6".
• Mark a parallel line 2" from the fold and a second one 1" from the fold.
• Mark two lines perpendicular to the fold, spacing them about 2" apart.
• Select standard buttonhole #51.
• Touch the "presser foot 3" symbol on the function bar.
• Position the beginning of the buttonhole on the line closest to the fold, aligning the fold with
5
the / " marking behind the foot.
8
• Sew the first bead and stop stitching at the second line.
• Press the quick reverse button - as you stitch, the bottom bartack and second bead are sewn.
• Stop the machine even with the first stitch of the first bead - press quick reverse.
• The machine sews the top bartack, ties the stitches off and stops automatically.
• Auto appears on the screen and the buttonhole is programmed.
Notes:
- The first bead is sewn forward, the second bead backward.
- The buttonhole must be reprogrammed after altering stitch length, width
or balance.
- Practice using the fabric and stabilizer to be used in the finished project.
- Stitch buttonholes at consistent speed.
• Trim threads close and mount the sample.
BERNINA
M Y
ASTERING OUR
BERNINA
Fabric:
Stabilizer:
Needle:
Thread:
Presser Foot:
1/10/02
®
®
artista 170 QPE/180
Heavy flannel, 6" x 6"
1 piece, 3" x 6"
90/14 Embroidery
30 weight cotton embroidery
Standard Buttonhole Foot #3/3C
artista 170 QPE/180/48