Bernina artista 170 QPE/180 Owner's Workbook page 95

Table of Contents

Advertisement

M
ASTERING
Y
OUR
BERNINA
®
Creating the Leaves
- Use different widths of ribbon for the leaves and stem. Ex: use 4mm for stem and 2mm for leaves.
- Grosgrain ribbon is recommended for the first try; silk ribbon can also be used.
- Using the drawing on the previous page as a guide, position ribbon for the leaves first. Glue or pin
in place.
- Select a double needle that corresponds to the width of the selected ribbon.
- When the tip of the leaf is reached, stop sewing and secure the stitches.
- Fold the ribbon over and begin sewing again at fold.
- Repeat for the other leaf. Be sure they are close enough so the stem will cover the raw edges.
- Position the stem and stitch in place.
Creating the Fringe for the Flower
- Position the Circular Embroidery Attachment #83 on the machine and set it for a 2.5" circle.
- Mark the center of the flower on the fabric and position it on the pin of the attachment.
- Attach Tailor Tack foot #7 - select stitch #2 - SW 2mm and SL satin - Tension, 1.
- Sew in a circle. When the beginning is reached, overlap the stitching about ½".
- Gently remove the stitches from the foot.
- Use a seam sealant to secure the thread tails.
- With fine embroidery scissors, cut the loops of the stitches at the top.
- Carefully lay the stitches flat and with a narrow, close zigzag, sew down the middle of the cut
stitches to secure the threads in place.
- Fluff up the fringe around the stitching.
Center of Flower
- Center a piece of narrow ribbon inside the fringed circle.
- Attach it to the fabric with a Stitch #60 and Button Sew-on Foot #18 (drop the feed dog).
- Thread the ends of the ribbon thru the holes of a 2-hole button that will become the center of
the flower. Tie the ribbon in a bow.
BERNINA
M
Y
ASTERING
OUR
BERNINA
FRINGED FLOWER
Fabric:
Denim, 9" x 9"
9" of ribbon,
2mm and 4mm wide grosgrain ribbon
Stabilizer:
1 piece tear-away, 9" x 9"
Needle:
90/14 Embroidery
Double/sizes to match grosgrain ribbon.
Thread:
30 wt. cotton
Presser Foot:
Reverse Pattern Foot #1/1C
Tailor Tack Foot #7(optional accessory)
Button Sew-on Foot #18
Circular Embroidery Attachment #83 (optional accessory)
Other:
Large, flat 2-hole button
1/10/02
®
®
artista 170 QPE/180
1
/
" wide
8
artista 170 QPE/180/95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Artista 170 qpeArtista 180

Table of Contents