Bernina artista 170 QPE/180 Owner's Workbook page 121

M
ASTERING
Y
OUR
BERNINA
®
TTC BUTTON - Tension / Tutorial / Creative Consultant
Thread Tension (180 only)
Basic tension settings are applied automatically to a selected stitch or program. Changes can be made to the
tension of a stitch without affecting other stitches. Place the tension icon on the function bar for easy access.
• Press the TTC button and the TTC menu appears.
• Select Thread Tension
- The tension screen appears - arrows up = more tension and arrows down = less tension
- The adjustment affects only the selected stitch; does not remain after machine is turned off.
• Touch OK to confirm, save and return to the stitch screen.
- You may stitch from this screen, allowing you to continue to sew and adjust before you save.
• Touch RESET to return the tensions to the basic settings (either factory or your adjusted settings)
• Touch OK to save changes.
Tutorial
A "self help program" or "on-line manual", this provides concentrated on-screen information about various
aspects of the machine.
• Press the TTC button and the menu appears.
• Select Tutorial.
- The tutorial sub-menu appears with a list of topics about the machine.
• Select the FHS system box; touch OK to confirm.
- Touching ESC will return you to the TTC menu.
- The clock on the screen shows that the computer is searching for the information.
- The information about the chosen subject appears on the screen.
- Some screens also have graphics to visually explain the subject.
• When finished viewing the subject contents, touch ESC to leave the screen.
Creative Consultant
This feature provides information and help on a variety of sewing needs.
• Press the TTC button - the TTC menu appears
• Select the Creative Consultant box and the fabric menu appears.
- A list of commonly used fabrics are in the menu.
• Use the arrows to scroll through the list
• Select single knit jersey and touch OK to confirm.
-ESC takes you back to the previous screen.
-The techniques menu appears with a list of common sewing techniques.
• Select "seaming" - confirm with OK.
- The information screen appears displaying settings and suggestions for the best way to
handle the type of fabric and the technique you have chosen.
- The tension is set for the stitch automatically.
• Touch OK to confirm and return to the appropriate stitch screen.
- The correct stitch is selected and you are ready to sew.
- The selected stitch can be changed if you chose.
CPS PROGRAM
• Used to load languages not programmed into the machine.
• Used to exchange embroidery designs in the module.
• You can also update your machine with new software using this system.
BERNINA
M Y
ASTERING OUR
BERNINA
1/10/02
®
®
artista 170 QPE/180
artista 170 QPE/180/121