Bernina artista 170 QPE/180 Owner's Workbook page 80

M
ASTERING
Y
OUR
BERNINA
®
• Select stitch #2 - SW 2mm and SL satin - Tension 1 - Tailor Tack Foot #7.
• Put a contrast all-purpose sewing thread in the bobbin.
• Turn under ½" seam allowance on both pieces of fabric and press.
• Butt the folds together under the center of the presser foot, with right sides up.
• Guide fabric while sewing, so needle swings pierce both fabric pieces.
• Carefully remove the bobbin thread and gently separate the two fabrics, leaving them joined
by strands of the upper thread.
• Change to Embroidery Foot #6.
• Sew halfway with Stitch #406 and the remainder with Stitch #345.
• Engage the Mirror Image function, if needed.
• Anchor the fringe to the fabric edge by oversewing it.
• After fringe is secured on one side, the other fabric can be pulled away.
• Trim excess seam allowance from wrong side if needed.
BERNINA
M Y
ASTERING OUR
BERNINA
FRINGING
Fabric: Firm fabric - 2 pieces, 4" x 6" each
Needle: 90/14 Embroidery
Thread: Rayon Embroidery
Presser Feet: Tailor Tack Foot #7 (optional accessory)
Embroidery Foot #6 (optional accessory)
1/10/02
®
®
artista 170 QPE/180
artista 170 QPE/180/80