Bernina artista 170 QPE/180 Owner's Workbook page 82

M
ASTERING
Y
OUR
BERNINA
®
• Select stitch #2 - SW 2mm and SL satin - Tension 1 - Tailor Tack Foot #7.
• Place fabrics right sides together; sew with a
• Sew slowly - adjust motor to ½ speed.
• When finished sewing the seam, pull the two layers firmly apart and press open.
• Change to Open Embroidery Foot #20/20C for better visibility - may need to stabilize the
stitching area to prevent tunneling.
• From the right side, anchor the fagoting to the fabric on either side with a decorative stitch
through the seam allowance. (Stitch #337 and #413 are used in the illustration.) Adjust width
and length as desired; engage Mirror Image as needed.
• Trim any excess seam allowance if needed.
• To "bundle" the fagoting stitches into groups: Select the Triple Straight Stitch #6 - change to
Reverse Pattern Foot #1/1C; center the foot over the fagoting stitches and sew down the
middle.
BERNINA
M Y
ASTERING OUR
BERNINA
BUNDLING
Fabric: Firm fabric - 2 pieces, 3" x 5" each
Needle: 90/14 Embroidery
Thread: Embroidery
Presser Feet: Tailor Tack Foot #7 (optional accessory)
Open Embroidery #20/20C
Reverse Pattern Foot #1/1C
1/10/02
®
®
artista 170 QPE/180
5
/ " seam on a 5" side.
8
artista 170 QPE/180/82