For Better Sound; Connecting To A Satellite Receiver - JVC DR-MV5BEK Instructions Manual

Filename [MV5SEK_12RemoSys.fm]
MV5SEK_00.book Page 76 Wednesday, August 31, 2005 7:58 PM
SYSTEM CONNECTIONS
76
EN

Connecting To A Satellite Receiver

Connect the satellite receiver to the [L-2 IN/DECODER] connector,
then connect the [L-1 IN/OUT] connector to the TV's connector.
NOTES:
Set "L-2 SELECT" to "VIDEO/RGB" or "S-VIDEO/RGB". (
You can use the Automatic Satellite Programme Recording function
( pg. 36) with this connection. (DVD deck only)
To record a programme via the satellite receiver, select L-2 mode by
pressing PR +/– so that "L-2" appears on the front display panel.
For details, refer to the instruction manual of the satellite receiver.
Outdoor unit
Satellite cable
Satellite receiver
TV
IMPORTANT
When you set "L-2 SELECT" to "SAT VIDEO/RGB" (
is possible to view a satellite broadcast with the TV set to its AV
mode even if the unit is turned off. When the unit is in Stop mode
or recording, press TV/VIDEO on the remote control to turn off
the video indicator ( ) on the unit.
If you turn on the unit when the satellite receiver's power is off,
nothing appears on the TV screen. In this case, turn on the satellite
receiver, or set the TV to its TV mode, or press TV/VIDEO on the
remote control to set the unit to the AV mode.
Page 76
Connecting/Using A Decoder (DVD
Deck Only)
The [L-2 IN/DECODER] connector can be used as an input
connector for an external decoder (descrambler). Simply connect a
pg. 45)
decoder and you can enjoy a variety of programming that is
available through scrambled channels.
Aerial
TV aerial cable
ANTENNA IN
ANTENNA OUT
1
2
decoder's 21-pin SCART connector using a 21-pin SCART cable.
pg. 45), it
Decoder
TV
Set "L-2 SELECT" to "DECODER". (
Connect your unit's [L-2 IN/DECODER] connector to the
Wednesday, 31 August 2005 19:58
Masterpage:Left0
TV aerial cable
L-1 IN/OUT
L-2 IN/
DECODER
RF cable (provided)
pg. 45)