Table of Contents
Advertisement
Filename [MV5SEK_05Name.fm]
MV5SEK_00.book Page 18 Wednesday, August 31, 2005 7:58 PM
INITIAL SETTINGS
18
EN
Preset Download
Auto Channel Set By Downloading From TV/Auto
Clock Set/Auto Guide Program Number Set
ATTENTION:
You can use this function only with a TV offering T-V Link, etc.* Be
sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART
cable. The degree of compatibility and available functions may differ by
system.
VHS
ENTER
Page 18
If you have connected the unit to your TV via a 21-pin SCART
cable (
Download instead of the Auto Set Up in step 2 on page 17. After
downloading, the unit sets the clock and Guide Program numbers
automatically.
Slide the TV/DVD switch to DVD.
1
Press 1 to turn on the unit. The AUTO SET/T-V LINK display
appears on the TV screen.
2
Press rt to select "T-V LINK" and press ENTER. The T-V
LINK screen will appear, and the unit automatically performs Auto
Channel Set.
When Auto Channel Set is
completed, "PLEASE WAIT" will
be displayed for about 90
seconds, since channel data is
exchanged between the DVD
deck and the VHS deck. No
operation will be done during this
time.
DVD
ATTENTION:
Preset positions on the front display
panel increase from "PR 1"; do NOT
press any button on the unit or
remote control until the front display
panel shows clock time, "PR 1" or "–
–:– –" as illustrated on page 19.
NOTES:
For details, refer to the instruction
manual of your TV.
In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the unit can perform neither Auto Clock Set
nor Auto Guide Program Number Set.
If there is a power cut, or if you press 1 or SET UP while
downloading or set up is in progress, it will be interrupted; be sure to
turn off the unit power once and try again from the beginning.
Auto Clock Set may not function properly depending on the reception
condition.
On this unit, the characters available for station names (ID) are A–Z,
0–9, –,
may differ from those of your TV. (
After "Preset Download" is completed, perform "Monitor Set
SET UP
(DVD Deck Only)" on page 21.
pg. 15), the unit will automatically perform Preset
INITIAL SET UP
INITIAL SET UP / CHANNEL SET
AUTO SET
T-V LINK
SET UP
EXIT
INITIAL SET UP
INITIAL SET UP / CHANNEL SET
AUTO SET
T-V LINK
SET UP
EXIT
, + and
(space). Some names of downloaded stations
f
I
pg. 87)
Wednesday, 31 August 2005 19:58
Masterpage:Left+
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
PLEASE WAIT...
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
Hide quick links:
Advertisement
Table of Contents
