JVC DR-MV5BEK Instructions Manual page 89

Filename [MV5SEK_13Subsidiary.fm]
MV5SEK_00.book Page 89 Wednesday, August 31, 2005 7:58 PM
Format A Disc (DVD Deck Only)
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
ATTENTION:
When a disc is formatted, all recordings and data are erased. It is
impossible to restore them.
Never turn off the unit or disconnect the AC power cord while
"NOW FORMATTING..." is displayed on the TV screen.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
Load a DVD-RAM/RW disc to format.
ENTER
Page 89Wednesday, 31 August 2005 19:58
Format A DVD-RAM Disc
1
Press DVD so that the DVD lamp lights up on the unit.
2
Press SET UP to access the Main Menu screen.
3
Press w e to select "DVD SET UP", then press t.
4
Press w e to select "UTILITY",
then press t.
5
Press rt w e to select
"FORMAT", then press ENTER.
Press w e to select "YES", then
press ENTER.
6
Press w e to select "OK", then
press ENTER.
Format A DVD-RW Disc
1
Perform steps 1 to 4 of "Format A DVD-RAM Disc" as above
before continuing.
2
Press rt w e to select "FORMAT", then press ENTER. Press
w e to choose "VR MODE" or "VIDEO MODE", then press ENTER
when "DISC WILL BE FORMATTED" appears on the TV screen.
"VR MODE": To be chosen when you want to record, erase, or edit
data on the disc repeatedly.
"VIDEO MODE": To be chosen when you want to erase all the data
on the disc once played back to record new data, or play back the
DVD disc on other DVD players.
3
Press w e to select "YES", then press ENTER.
NOTES:
It is impossible to format Version 1.0 DVD-RW discs in Video mode.
It is impossible to format DVD-R discs.
All the titles on a disc will be deleted once the disc is formatted even if
they are protected titles. (
rtwe
SET UP
Masterpage:Right+
SUBSIDIARY SETTINGS
DVD SET UP
LANGUAGE SET
FORMAT
FINALISE
CANCEL DISC FINALISATION
SET UP
EXIT
pg. 67)
89
EN
FUNCTION SET UP INITIAL SET UP
AUDIO OUTPUT UTILITY
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT