JVC DR-MV5BEK Instructions Manual page 83

Filename [MV5SEK_13Subsidiary.fm]
MV5SEK_00.book Page 83 Wednesday, August 31, 2005 7:58 PM
VIDEO Plus+ System Setup
IMPORTANT:
Normally, Auto Set Up ( pg. 17), Preset Download (
Auto Channel Set ( pg. 84) sets the Guide Program numbers
automatically. You need to set the Guide Program numbers manually
only in the following cases.
When timer-programming with the VIDEO Plus+ system, the
channel position, where the station you wish to record is received
on your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download or Auto
Channel Set has taken place,
—Set the Guide Program number for that station manually.
When you wish to timer-record a satellite programme with the
S V system,
HOW IEW
—Set the Guide Program numbers for all satellite broadcasts received
on your satellite receiver.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
VHS
ENTER
Page 83Wednesday, 31 August 2005 19:58
Guide Program Number Set
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "INITIAL SET UP", then press t.
3
Press w e to select "GUIDE
pg. 18) or
PR", then press t.
4
Press rt to select "GUIDE
PROGRAMME", then press
ENTER.
5
Press rt to select the Guide
Program number for the desired
station as shown in the TV
listings. Then press ENTER.
To change the Guide Program number in 10 increments, press and
hold rt.
6
Press rt to select "TV PROGRAMME", then press ENTER.
7
Press rt to select the number of the unit's channel position on
which the Guide Program number's broadcast is received by the
unit or the satellite receiver. Then press ENTER.
If the satellite broadcast is received on your unit's auxiliary channel
"L-2", select "L-2" for the channel position.
Repeat steps 4 and 7 as necessary.
8
Press SET UP to complete the setting.
Guide Program Number
"Guide Program (GUIDE PROGRAMME) number" refers to the
assigned TV station numbers, according to broadcast area, for the
VIDEO Plus+ timer recording. The Guide Program numbers can be
found in most TV listings.
SET UP
Masterpage:Right+
SUBSIDIARY SETTINGS
DVD SET UP
AUTO CH SET MANUAL CH SET
GUIDE PROGRAMME
TV PROGRAMME
SET UP
EXIT
83
EN
FUNCTION SET UP INITIAL SET UP
GUIDE PR CLOCK SET
1
F-1
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT