Installing The Base Station; Base Station Features - Nortel T7406 Installation Manual

Installing the Base Station

This section describes the base station and:
• how to mount the base station on a wall
• what programming is required before you connect the base station to your system
• how to connect the base station to your system
The T7406 cordless telephone operates on the same principle as a two-way radio. Therefore, the
location of the base station affects the range of reception. The base station should not be installed
where radio waves are blocked or reflected, such as next to a filing cabinet.
For optimal performance, install the base station at least 2.4 meters (eight feet) above the floor and
at least 3.2 meters (ten and one half feet) apart from a second base station. Always position the
antenna at a 90° angle to the base station.

Base Station Features

This section illustrates the base station for the T7406 system.
Antenna
Base
antenna
(90° to base
station)
Note: When power is connected to the base station, the LED on the front of the
unit starts flashing. During operation the LED flashes every second to indicate
that the unit is receiving power.
Chapter 1 About your T7406 Phone
LED indicates base
station has power
T7406 Cordless Handset Installation Guide
9