System Feature Codes - Nortel T7406 Installation Manual

34 Chapter 3 Using the Handset Display Buttons
Features
To program a feature memory button:
Press ≤•‹.
1
2 Press a memory button.
Press ≤ and enter the feature code.
3
Press OK to store the feature code.
4
5
Label the button.
Refer to "System Feature codes" on page 34
administrator can also provide a list of all the feature codes that are available.
Erase memory buttons
To erase a memory button:
Press ≤•⁄.
1
2 Press the memory button you want to erase.
Press OK to erase the button.
3
Button Inquiry
Use the Button Inquiry feature to determine what is programmed on the memory buttons on your
handset.
To use the Button Inquiry feature from the handset:
Press ≤•‚.
1
2 Press the button(s) you want to check, and read the display.
Press ≤ or ® when you are finished.
3

System Feature codes

Contact your System Coordinator for information about all the feature codes that are available on
your system and how they operate.
Some of the most common Feature codes are:
Button inquiry
Call Forward
Conference
Do Not Disturb
Last Number Redial
P0606142
for a list of the most common features. Your system
≤•‚
≤›
≤‹
≤°fi
≤fi