Assigning The Security Code - Nortel T7406 Installation Manual

OK
6 Press .
The display shows
7 Re-enter the password.
OK
8 Press .
The display shows
9
Press the Options button to exit the Option menu
The display changes to show the date and time.
Password errors
If you enter an incorrect password and the display shows
menu item and try again.
Lost password
Make a note of the new password. If you forget your password, you will need to contact your
Distributor for help to unlock the set.

Assigning the Security Code

After you assign the handset ID # to a handset, you need to configure the handset to a base station.
Follow these steps to assign a Security code to the handset.
1 Press the Options button.
SHOW
2 Press .
3 NEXT
Press until the display shows
4 CHANGE to assign a security code to the handset.
Press
5
Enter the six-digit password (default 000000).
OK
6 Press . The display shows
7 Enter the six-digit Security code.
The display changes to show the code as entered.
OK
8 Press to accept the code.
The display shows
If you are assigning a handset to an existing base, your handset is now connected to the system.
If you are assigning the first handset to a new base station (which has no security code), continue
with the following steps:
9 The display shows
base station.
The display shows
10 Unplug the AC power adapter connected to the base station, and plug it back in again.
Confirm New PWD
.
PWD Changed! .
4. Set S.S. Code :
Press 6 digits
4. Set S.S. Code :
.
4. Set S.S. Code : , press
5. Send S.S. Code .
Chapter 1 About your T7406 Phone
PWD Error!
, return to the
.
The display shows
.
NEXT to get ready to send the security code to the
T7406 Cordless Handset Installation Guide
19
7. Chg Password
Enter Password .