Configuring The First Handset To A Base Station; Changing The Handset Id Password - Nortel T7406 Installation Manual

18 Chapter 1 About your T7406 Phone
Configuring the Handset ID Number
Each of the three handsets registered to a base station share an identical Security code, but each
handset has a unique Set ID of 1, 2, or 3.
Follow these steps to set the handset ID and new password:
1 Press the Options button.
2 Press SHOW
3 NEXT
Press
4 SHOW
Press
The display shows the current Handset ID #.
• If this is the correct number, press
• If you want to change the number, follow these steps:
a
Press
The display shows
b Enter the default password (000000).
c
Press
The display shows
left of the LCD.
d Press the digit that you want to assign to this handset.
e Press
The display shows

Changing the Handset ID Password

After you enter the handset ID, if you want to change the password for the ID access, follow these
steps:
NEXT
1 Press
Note: This password is used to access the Handset ID option. If you decide not to
change the password, press the Option button to exit the menu.
SHOW
2 Press
The display shows
3 Enter the default six-digit password (000000) or the last password you entered.
OK
4 Press .
The display shows
5 Enter a new six-digit password.
Note: For ease of administration, it is recommended that you use the same
password as the one you used for the Security code/S.S. Code.
P0606142
.
until the display shows
.
CHANGE
.
Enter Password
OK
to accept the code.
Press Digit 1 - 3
OK
.
6. Handset ID
until the display shows
.
Enter old PWD
Enter New PWD
6. Handset ID
.
OK
and continue with the next section.
. (six digits)
. The current Handset ID # is displayed on the bottom
.
7. Chg Password
.
.
.