JVC 0503-AH-ID-JVE Instructions Manual page 100

100
EN
ON-SCREEN MESSAGES (cont.)
PROGRAMME NOT COMPLETED
PROGRAMME OVERLAPPED
PLEASE CONFIRM AND MODIFY
TIMER PROGRAMMING STOPPED
PROGRAMME COMPLETED
PRESS "OK" THEN [ ] TO ENTER TIMER STANDBY
#
MODE
TIMER RECORDING WILL START WITHIN 5 MIN
INSERT CASSETTE AND PRESS [
REMAINING CAPACITY IS SMALL
DELETE UNWANTED PROGRAMME FROM HDD
CAPACITY IS FULL, RECORDING STOPPED
CAPACITY IS FULL, UNABLE TO RECORD
DELETE UNWANTED PROGRAMME FROM HDD
TITLE MEMORY IS FULL, UNABLE TO RECORD
DELETE UNWANTED PROGRAMME FROM HDD
COPY PROHIBITED, UNABLE TO RECORD ON HDD
NO PROGRAMME TO PLAYBACK
UNABLE TO GO BACK ANYMORE
DUBBING COMPLETED
DUBBING STOPPED
TAPE ENDED, DUBBING STOPPED
COPY PROHIBITED
IMPOSSIBLE DURING DV DUBBING OR RECORDING
IN DV MODE
CAN NOT SELECT PROGRAMME RECORDED IN DV
MODE
CAN NOT SELECT PROGRAMME RECORDED OTHER
THAN IN DV MODE
MESSAGE
]
#
TROUBLESHOOTING (cont.)
DESCRIPTION
The timer programme you set is overlapping with another
timer programme. ( pg. 50)
Appears when you stop setting timer programme.
Timer programming is completed properly.
The recorder is not in the timer-standby mode. The timer
recording will start in about 5 minutes.
The remaining capacity of the hard disk drive is in short
for the current recording. (
The recording stopped due to the shortage of the free
space on the hard disk drive.
The recording cannot be started due to the shortage of the
free space on the hard disk drive. (
The remaining capacity is full for registration for the
Navigation system. The recording cannot be started even
though the capacity for the recording is enough.
( pg. 58)
It is not possible to record a copy-protected programme.
There is no recorded programme on the hard disk drive.
It is not possible to go back beyond the start point of the
recording for Live Memory Playback. (
Appears when Easy Dubbing is completed. (
Appears when Easy Dubbing is stopped. (
Appears when the tape ends during Easy Dubbing.
( pg. 63)
It is not possible to dub a copy-protected programme.
When input mode is set to "D-1" or during recording in
the recording speed of DV, other operations such as
playback of another programme, etc. are not possible.
During recording, you cannot playback another
programme recorded in the recording speed of DV.
When you create a play list, you cannot include scenes
recorded in the recording speed of DV and scenes
recorded in another mode in the same play list.
pg. 58)
pg. 58)
pg. 29)
pg. 63)
pg. 63)