JVC 0503-AH-ID-JVE Instructions Manual page 97

Hdd & s-vhs video recorder
Table of Contents

Advertisement

SYMPTOM
3. Tape-to-tape editing is not
possible.
4. Camcorder recording is not
possible.
$
5. " " and "
" on the front display
panel won't stop blinking.
TIMER RECORDING
SYMPTOM
1. Timer recording won't work.
2. Timer programming is not
possible.
#
3. "
" on the front display panel or
S-VHS indicator won't stop
blinking.
#
$
4. "
", " " and "
" on the front
display panel won't stop blinking.
POSSIBLE CAUSE
The source (another video recorder,
camcorder) has not been properly
connected.
All necessary power switches have
not been turned on.
The input mode is not correct.
The camcorder has not been
properly connected.
The input mode is not correct.
The end of the tape was reached
during recording.
POSSIBLE CAUSE
The clock and/or the timer have
been set incorrectly.
The timer is not engaged.
Timer recording is in progress.
The timer is engaged but there's no
cassette loaded.
The cassette is ejected, then the
recorder is powered off
automatically after the end of the
tape is reached during timer
recording.
The loaded cassette has had its
record safety tab removed.
The end of the tape was reached
during timer recording.
CORRECTIVE ACTION
Confirm that the source is properly
connected.
Confirm that all units' power switches
are turned on.
Set the input mode to "L-1", "L-2" or
"F-1".
Confirm that the camcorder is
properly connected.
Set the input mode to "L-1", "L-2" or
"F-1".
The programme may not have been
recorded in its entirety. Next time
make sure you have enough time
on the tape to record the entire
programme.
CORRECTIVE ACTION
Re-perform the clock and/or timer
settings.
#
Press
and confirm that "
displayed on the front display panel.
Timer programming can't be
performed while a timer recording is
in progress. Wait until it finishes.
Load a cassette with the record safety
tab intact.
Remove the cassette and cover the
hole with adhesive tape, or insert a
cassette with the record safety tab
intact.
The programme may not have been
recorded in its entirety. Next time
make sure you have enough time on
the tape to record the entire
programme.
97
EN
#
" is

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enlpt0736-001bHm-hds4e

Table of Contents