Edit To Or From Another Video Recorder - JVC 0503-AH-ID-JVE Instructions Manual

70
EN
Edit To Or From
Another Video
Recorder
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
?
You can use your recorder as the source player or as the
recording deck.
A
Make connections.
Connect the player's 21-pin SCART connector to the
recorder's 21-pin SCART connector as illustrated on
page 71.
A When using your recorder as the source player ...
... connect its L-1 IN/OUT connector to the recording
deck.
B When using your recorder as the recording deck ...
... connect its L-1 IN/OUT or L-2 IN/DECODER
connector to the source player.
C If another recorder is compatible with the Y/C signal ...
... connect your recorder's L-1 IN/OUT connector to
another recorder.
With C connection ...
When using your recorder as the recording deck, set "L-1
INPUT" to "S-VIDEO" and "L-2 SELECT" to "A/V" (
69).
When using your recorder as the source player, set "L-1
OUTPUT" to "S-VIDEO" (
B
Select the recording deck.
Slide TV/CABLE/SAT to the right, then press HDD or S-
VHS.
C
Set the input mode of recording deck.
With this video recorder, press AUX (number key "0")
and/or VCR PR to select "L-1" for the L-1 IN/OUT
connector, or "L-2" for the L-2 IN/DECODER connector,
depending on the connector being used.
When using another recorder as the recording deck, refer to its
instruction manual.
When using the L-2 IN/DECODER connector, set "L-2
SELECT" to "A/V" ( pg. 69).
D
Set the edit mode.
See "PICTURE CONTROL" on page 83.
E
Start the source player.
Engage the Play mode of the source player.
F
Start the recording deck.
Engage the Record mode of the recording deck.
EDITING (cont.)
pg. 68,
pg. 68).