Delete A Channel - JVC 0503-AH-ID-JVE Instructions Manual

F
Input the channel.
Press the number keys to input the channel number you
want to store.
Input "0" before any single number entries.
To input the registered station name (ID –
until "– – – –" (ID setting) begins blinking, then press
For fine tuning adjustment, press
rt
then press . While tuning, "+" or "–" appears.
When storing a channel that sends scrambled broadcasts,
e
press until "OFF" (Decoder setting) blinks, then press
to set "DECODER" to "ON" ("OFF" is the default setting).
When "L-2 SELECT" is set to "A/V" or "SAT", the "DECODER"
setting cannot be changed (
G
Enter new channel information.
Press OK and the Confirmation screen appears.
Repeat steps D – G as necessary.
H
Close the Confirmation screen.
Press MENU.
To change positions, see "Change Station Channel Position"
( pg. 91).
If you wish to set station names other than the ones registered
in your recorder, see "Set Stations (B)" (
ATTENTION
Guide Program numbers are not set when channels are
stored manually. If an attempt is made at timer programming
with the S V system in this state, "GUIDE PROGRAM
HOW IEW
IS NOT SET SET GUIDE PROG THEN RETRY" appears on the
TV screen; set the Guide Program Numbers (
manually.

Delete A Channel

Perform steps A and C of "Manual Channel Set" on page 90
to access the Confirmation screen before continuing.
A
Select the item.
w r e t
Press until the item you want to delete begins
blinking.
B
Delete a channel.
&
Press .
The item directly beneath the cancelled one moves up one
line.
Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press MENU.
pg. 94), press
rt
e
until "+/–" begins blinking,
rt
pg. 69).
pg. 92).
pg. 85)
Change Station Channel Position
Perform steps A and C of "Manual Channel Set" on page 90
to access the Confirmation screen before continuing.
A
e
Select the item.
.
w r e t
Press
blinking. Then press OK and the station name (ID) and its
channel (CH) number begin blinking.
B
Select the new position.
w r e t
Press
position, then press OK.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move
down one space.
Repeat steps A and B as necessary.
C
Close the Confirmation screen.
Press MENU.
until the item you want to move begins
to move the station to the new channel
91
EN