JVC 0503-AH-ID-JVE Instructions Manual page 43

?
Elapsed Recording Time Indication
1
Set the counter display.
Press – –:– – so that a counter reading appears on the TV
screen and the front display panel.
The front display panel shows
the counter reading with ":"
lit.
2
Reset the counter.
Press 0000 before starting recording or playback.
The counter is reset to "0:00:00" and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press MODE.
The current tape remaining time and the current recording
speed alternate in the front display panel. You can also confirm
the information on the TV screen. (
NOTE:
Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
"– –:– –" may sometimes appear, or the display may blink on
occasion.
Super VHS ET (S-VHS ET)
— Recording on VHS cassettes with
S-VHS quality
You can record in SP mode on VHS cassettes with S-VHS picture
quality. Set "S-VHS ET" to the desired mode (
43
EN
pg. 10)
pg. 82).