JVC 0503-AH-ID-JVE Instructions Manual page 99

ON-SCREEN MESSAGES
CAN NOT MODIFY LIVE MEMORY TIME, MORE
CAPACITY NEEDED
DELETE UNWANTED PROGRAMME THEN RETRY
DO YOU WANT TO DELETE SELECTED PROGRAMME?
DO YOU WANT TO DELETE SELECTED PROGRAMME
INFORMATION?
DO YOU WANT TO DELETE SELECTED CASSETTE
INFORMATION?
INSERT CASSETTE
CAN NOT MODIFY INDEX
NO CASSETTE
"NAVIGATION" IS SET TO "OFF"
UNABLE TO SET TIMER PROGRAMME
DUE TO SHORTAGE OF CAPACITY
DELETE UNWANTED PROGRAMME FROM HDD
PROGRAMME FULL
DELETE UNWANTED TIMER PROGRAMME
PLEASE ADJUST CLOCK BEFORE TIMER
PROGRAMMING
GUIDE PROGRAM IS NOT SET
SET GUIDE PROGRAM THEN RETRY
SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY
MESSAGE DESCRIPTION
There is not enough memory on the hard disk drive for
Live Memory Playback. To increase the free space, dub
some programmes to cassettes or delete the unwanted
programmmes. ( pg. 63, 58)
Appears when you tried to delete the selected programme
from the hard disk drive. Make sure you really want to
delete the programme. (
Appears when you tried to delete the selected programme
information from the hard disk drive. Make sure you
really want to delete the programme information.
( pg. 58)
Appears when you tried to delete the selected cassette's
all information from the hard disk drive. Make sure you
really want to delete the cassette's information.
( pg. 58)
Appears when you tried to modify the information for
VCR Navigation, but the cassette is not loaded. To modify
the information for VCR Navigation, the cassette must be
loaded. ( pg. 56)
It is not possible to modify the index of a programme
while the hard disk drive is in recording. Wait until the
recording finishes or stop recording to modify the index.
( pg. 56)
For VCR Navigation, load a cassette before pressing
NAVIGATION. ( pg. 37)
For VCR Navigation, set "NAVIGATION" to "ON" on the
"VCR SET UP 1" screen, then press NAVIGATION.
( pg. 37, 81)
There is not enough memory on the hard disk drive for
recording. To increase the free space, dub some
programmes to cassettes or delete the unwanted
programmmes. ( pg. 58)
You can programme this recorder to timer-record as many
as 16 programmes. To programme more, you need to
cancel a timer programme already set. (
To set the timer programme, the clock must be set in
advance. ( pg. 86)
To set the timer programme using the S
the Guide Program number must be set in advance.
( pg. 85)
An invalid S V number is input. (
HOW IEW
EN
pg. 58)
pg. 50)
V system,
HOW IEW
pg. 46)
99