GPS TrackMaker Reference Manual page 86

Selection by Inclusion
Press and drag the mouse with the left button pressed over the area that you want to select. This selection
can only be done if the Detect Elements button
released, everything that is inside of the rectangle will be selected.
Selection by Exclusion
Many times, it's necessary to delete most of the data in the screen, with the objective of transferring to the GPS
receiver just a few Waypoints, Tracklogs and Routes. GPS TrackMaker® allows the selection by exclusion,
through the following steps: with Detect Elements button
and drag the mouse with the left button pressed. Everything that is outside the rectangle will be selected, allowing
deleting the data by exclusion.
Waypoint Selection by Icons
Selecting Tracklogs by Style
To select Tracklogs by style, press
color of Tracklogs to select. After choosing one style and its color press the <OK> button. The program will select
all Tracklogs that have that same style.
Inversion of the Selection
The selection by exclusion can also be done through the Invert Selected Points
Tool Bar. When pressed, all selected points related to Waypoints, Tracklogs and Routes will be automatically
deselected, and all non-selected points will be selected, even if they are not being shown in screen. If no data is
selected and the button
<CTRL A>.
To select Waypoints by icons, press
appear indicating only the icons used in the file. Click in one of the icons and the
program will select all the Waypoints that have that same icon.
located on the Toolbar. A window will appear asking which style and
is pressed, the result will be the same as the Select all function, accessed through
in the Drawing Toolbar is enabled. When the mouse button is
pressed, press
86
and hold down the SHIFT key
located on the Toolbar. A window will
button, located on the