Selecting Waypoints Far From Routes - GPS TrackMaker Reference Manual

5.2 Selecting Waypoints far from Routes

This function is available in Tools menu and allows removing all Waypoints located away from the Routes. So the
GPS can be loaded only with the most interesting Waypoints closest to the Route.
Many GPS receivers have a limited memory for Waypoints. This function allows loading the receiver with
Waypoints located at a chosen distance to the Routes up to 200 km or 125 Miles. The advantage is that the User
can schedule a trip, loading only interesting locations into the receiver.
Press <MARK> button so the number of selected and non-selected Waypoints will be indicated. Note that the
selected Waypoints can be removed using the DEL key or through the
The non-selected Waypoints will remain on screen and can be transferred to the receiver using the respective
Interface . Observe the maximum distance chosen: as larger the distance, more Waypoints will remain non-
selected.
If Mark wpts out of quadrant box is enabled, only the Waypoints located outside of the Route quadrant will be
selected.
In GTM PRO®, press
After loading the file, just draw the Routes that you want between the
Waypoints and call the Select Wpts far from Routes in the Tools menu. Then
choose the maximum distance of the Route within which the Waypoints won't
be selected.
to select Waypoints far from Routes.
{bmc bt_delete.bmp}
60
button in Toolbar.