Manipulating Data; Cutting Data; Copying Data; Pasting Data - GPS TrackMaker Reference Manual

7 Manipulating Data

7.1 Cutting Data

To cut data, moving it to the Windows® clipboard, just select the Tracklogs, Routes and Waypoints that you want
and then press <CTRL X> or click on the Cut option in the Edit menu. Even if a single segment of Tracklog or
Route is selected, all the segments of the Tracklog (or Route) will be transferred to the Windows® clipboard.

7.2 Copying Data

To Copy the data to the Windows® Clipboard, just select the Tracklogs, Routes and Waypoints that you want, and
then press <CTRL C> or click on the Copy option in the Edit menu. It is important to note that in Tracklogs and
Routes, all the segments of the same Tracklog (or Route) will be copied and not the selected isolated segments.
Copying the Image from Screen to Clipboard
When the User copies the data, the image that is on the GPS TrackMaker® screen will also be transferred to the
Windows® clipboard allowing you to edit graphics through other programs like Paint® from Windows®,
PhotoShop®, PhotoPaint®, etc. The image can also be seen through the clipbrd.exe program that is part of the
Windows® operating system.
To copy the image from clipboard to one of the graphic programs indicated above, just open a new file and press
<CTRL V> (paste).
The image can be pasted in programs such as MS Word®, pressing Special Paste > Images .

7.3 Pasting Data

To paste the data from the Windows® clipboard in GPS TrackMaker®, just press <CTRL V> or click on the
Paste option in the Edit menu. It is important to note that in Tracklogs and Routes, all the segments of the same
Tracklog (or Route) will be pasted, even if only isolated segments have been copied.
To paste images to the GPS TrackMaker® screen, see
In GTM PRO®, the User can paste the data pressing the button
Pasting Images on Screen
.
70