GPS TrackMaker Reference Manual page 81

Sending the Profile Image to the Main Map
With the Stamp Tool
of the map, allowing treating it as an image and printing it with the main map.
Marking a Waypoint on the Profile
To mark a Waypoint on the Altitude Profile, press the left button and drag the mouse to the chosen position. A
small pin will be created. Then press
You can also mark a Waypoint by clicking on the pin with the mouse right button.
Numeric Information about the Profile
GTM PRO® supplies several information about distances, altitudes, speeds, etc.
Using GTM PRO®, you will have:
• Total distance
• Total time
•
Minimum and Maximum elevation
• Total of ascents and descents
• Gained and lost Altitudes
• Average speeds of ascend and descent
• Maximum vertical speed
• Vertical average speed
it is possible to transfer the vector drawing from the Altitude Profile to the main screen
to create the Waypoint in the place marked by the pin.
81