Related Manuals for GPS GT300
Summary of Contents for GPS GT300
-
Page 1: User Manual
User Manual (Version 1.1) Please read this manual carefully before attempting installation and online activation. Pictures are for indication and illustration purposes only. -
Page 2: Inside The Box
Introducing Your GT300 Learn about your device's layout, indications and specifications. 1 Inside the Box Pictures are for indication and illustration purposes only. NOTE: After opening the packing box, please check if the accessories are complete. If there is anything missing,... - Page 3 2 GT300 Overview 2.1 Introduction...
-
Page 4: Led Indication
GPS signal indicator (blue) Status Indication Slow flashing (interval 2s) Searching GPS signal Slow flashing (flash 0.1s after every 3s ) GPS signal has been acquired successfully Continuously in dark stops working GSM signal indicator (green) Status Indication Quick flashing (interval 0.3s) -
Page 5: Installation
Long press Call Short press when calls coming in Answer Family Number button 1 Short press during calls Turn down the volume Long press during calls Change to speaker mode Short press twice in a row Arm/disarm Mode button Long press Send location to platform automatically once Power ON/OFF... -
Page 6: Parameters Setting
Please send SMS command to the number of terminal so as to set up the DNS parameter. The terminal will reply “OK” automatically after setting successfully. Send SMS command: SERVER,1,DNS,Port,0# e.g. SERVER,1,gt300.goobaby.net,8827,0# 4.3 Add Family Numbers via SMS command (1) Add two Family Numbers Send SMS command:... -
Page 7: Add/Delete Family Numbers Via Platform
4.4 Delete Family Numbers via SMS Send SMS command: FN,D,1,2# (D means delete the number) 1,2 means sequence numbers Send SMS command: FN,D,Phone Number# 4.5 Add/delete Family Numbers via platform You can set SOS numbers via the platform when the terminal connects to the platform. 4.6 Call Family Numbers Long press Family Number buttons can call preset numbers. -
Page 8: Operation
4.11 Set SOS Number (1) Add SOS number Via SMS command Send SMS command: SOS, A,number1,number2,number3 #(A means add number). You could set 3 SOS numbers in maximum. If set successfully, the terminal will reply “ok”. e.g. SOS,A, 13510****60,135116****6,136126****8# (set all 3 SOS numbers) SOS,A, 13510****60# (set the first SOS number) SOS,A, ,135116****6#... -
Page 9: Vibration Alarm
If the GPS is located, the terminal will send accurate address information. If GPS is not located, the terminal will send LBS address information instead. And if GPS is located in 5 minutes later, the terminal will send accurate address information. -
Page 10: Low Battery Alarm
Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-11-23 22:28:51 If GPS is not located at all, the terminal will reply after 5mins：“GPS is failed to locate, no data, please try again!” (3)Ask for Google link Send SMS command from SOS number to the terminal:... -
Page 11: Reboot The Terminal
If GPS is located, it will reply google link of current longitude and latitude. If not located within 2 mins, it will rep ly google link of the latest longitude and latitude: e.g. Google link reply <DateTime:10-11-23 23:42:51> http://maps. oogle.com/maps?q=N22.571490,E113.877103 If GPS has never been located before, it will reply SMS after 10mins "GPS is fail to locate, no data, please try aga... -
Page 12: Troubleshooting
command/call to activate checking location function. During this mode, arm/disarm will not be executed. It will reply: “The terminal is in Deep Sleep mode. Please wake up!” Send SMS command: mode,3# 7 Appendix 7.1 Battery security ● Please use the original battery. The warranty will be invalid by using any other accessory. The manufacturer will not take any responsibility for any damage caused by not using the original battery. - Page 13 Weak signal Try again in a strong signal area Voltage is out of charging range of the Change to the proper voltage Charger cannot charge Non-standard charger Use charger that come with the package Poor contact Check if the plug is in Please contact the SIM card operator to GPRS function is not activated activate GPRS...