GPS TrackMaker Reference Manual page 41

In this window, the following data related to the track can be changed:
•
Geodesic coordinates (latitude/longitude) of the segment points
To change the coordinates, verify the
• Length of the segment
Changing the length causes the change of the geodesic coordinates of the second point of the Tracklog
segment, which is done automatically by the program. Verify the
Options in the Tools menu.
• Azimuth of the segment (Bearing)
The azimuth must be between 0º and 360º (as shown). The reference will be the true axis North-
South when the program is configured for geographic coordinates (Azimuth/North). In rectangular
systems such as UTM systems, if the segment is contained in only one zone, the reference will be the
north-south axis of the grid (Azimuth/Grid). A change of the angle will necessarily imply the
modification of the geodesic coordinates of the second point of the segment
To change the notation of the azimuth, see
• Tracklog Name
Each Tracklog can have a name for identification or a small text that individualizes it. This name or text can be
searched through dialog box Tracks and Routes located in Tool Bar 2.
Coordinate System, defined under Options , in the Tools menu.
Configuring Azimuth
41
Length Unit of Measurement
Angle.
defined under