Some Held Jobs Were Not Restored; Unsupported Disk - Lexmark X950 Series User Manual

SMTP server not set up. Contact system administrator.
An error occurred on the SMTP server, or the SMTP server is not configured properly. Touch Continue to clear the
message. If the message appears again, contact your system support person.

Some held jobs were not restored

Touch Continue to delete the specified job.
Note: Held jobs that are not restored stay on the hard disk and are inaccessible.

Unsupported disk

An unsupported printer hard disk has been installed. Remove the unsupported device, and then install a supported
one.
31.xx Missing or defective [color] cartridge
Try one or more of the following:
1
Remove and reinstall the specified print cartridge.
For instructions on removing a print cartridge, touch More Information.
2
Touch Continue to clear the message.
Note: If the message is not cleared, then replace the defective print cartridge.
32.xx [color] cartridge part number unsupported by device
Remove the unsupported toner cartridge, and then install a supported one.
34 Incorrect paper size, check [paper source]
Try one or more of the following:
• Load the appropriate paper or specialty media in the proper tray.
• Confirm that the wheel on Tray 1 is set to the paper size loaded in the tray. Make sure the paper size matches the
document you are trying to print.
•
Touch Continue to clear the message and print using a different tray.
•
Check the tray length and width guides and make sure the paper is loaded properly in the tray.
• Make sure the correct paper size and type are specified on the Print Properties or Print dialog settings.
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper
is large enough for the data being printed.
• Cancel the print job.
Troubleshooting
288