Basic Operations; Printing From A Paper Document Or Book - Riso EZ Series User Manual

REG-LL_EN.book Page 29 Wednesday, September 14, 2011 12:03 PM

Basic Operations

Printing from a Paper Document or Book

1
Turn the power on.
The power switch is located on the lower right side
of the machine.
: Power On
: Power Off
Important!:
• When the machine is in the Energy Saving
mode, the key is lighted. Press the
wake up the machine.
Note:
• If data is received from a computer while the
machine is being operated, that data may be given
a higher priority for making a master. To give a
higher priority to an original placed on the
machine, press the
2
Check the display.
Check that any Check & Error Display section is
not lighted or blinking.
p.102
Note:
• When the indicator is lighted, idling action is
activated just before the master-making operation.
p.64
3
key to
key to turn off its indicator.
When "ECO" is displayed:
When the power switch is set to ON or the
machine is activated from the Sleep status,
"ECO" is displayed in the Print Quantity Dis-
play.
If the PIN code-input is needed, "PASS" is con-
tinuously displayed.
When "PASS" is displayed:
The PIN code-input is required when "PASS" is
flashing on the Print Quantity Display. For the
PIN code-input, see p.31.
Place an original.
When placing on the Glass Platen
Open the Platen Cover and place the original
face down. Align the center of the original with
the mark on the left-hand side of the glass.
After placing the original, slowly close the
Platen Cover.
Magazines, books, scrap books, etc. should be
placed on the Glass Platen.
Note:
• When placing an original is completed, the
process is automatically changed to the
master-making mode; the Master-Making
indicator on the Control Panel lights. If the
indicator is not lighted, press the
Basic Operations
Basic Operations
p.19
key.
29