Setting Up The Management On/Off - Riso EZ Series User Manual

REG-LL_EN.book Page 80 Wednesday, September 14, 2011 12:03 PM
Advanced Features

Setting Up the Management ON/OFF

The administrator must be registered in advance from "Create User". ( p.78)
1
Press the
number "81".
2
Press the [
The "Management ON/OFF" mode is activated.
3
Enter a parameter number using the
Print Quantity keys.
0 : OFF
1 : ON
80
Setting Up User Management
key and enter the item
] key.
4
Press the [ ] key.
"Management ON/OFF" setting is updated, and
the item number entry mode is restored.
The next item number to be set can be entered.
To return to the normal mode, press the
the key.
Important!:
• If you press the key before pressing the
[ ] key, the setting is canceled and the nor-
mal mode is restored.
• If you press the key before pressing the
[ ] key, the setting is applied and the normal
mode is restored.
• The user will be asked to verify access during
operations if "Management ON/OFF" is set to
"ON". Entering the PIN code set in Create User
restores the normal mode.
key or
p.31