Preparing To Print; Setting Up The Paper Feed Tray - Riso EZ Series User Manual

REG-LL_EN.book Page 20 Wednesday, September 14, 2011 12:03 PM
Before Starting to Use

Preparing to Print

Setting up the Paper Feed Tray

1
Open the Paper Feed Tray.
2
Load paper.
Place paper in the printing orientation, and slide
the Feed Tray Paper Guides to fit to the sides of
the paper. Then turn the right and left Feed Tray
Paper Guide Levers to lock the guides.
:Unlock
:Lock
Important!:
• Do not use paper of inappropriate sizes or mix
paper of different sizes.
• Before sliding the Feed Tray Paper Guides,
position its lock lever to
• Make sure that the Feed Tray Paper Guides fit
tight up against the paper.
Failure to do so can produce undesired results.
20
Preparing to Print
3
Select the paper feed pressure.
Position the Paper Feed Pressure Adjustment
Lever according to the finish of the paper.
NORMAL (
CARD (
.
):For standard paper
):For thick or smooth-surface paper