Consumables; Ink Handling; Location Of Caution Label - Riso EZ Series User Manual

REG-LL_EN.book Page 27 Wednesday, September 14, 2011 12:03 PM
• The machine has precision parts and driving parts inside. Do not handle the machine in other ways than described
in this guide.
• Do not apply any shock to the machine.
• Do not stand the Print Drum (Cylinder) vertically. Doing so may pollute the floor, etc.
Important!:
• Do not unplug the power cord or turn off the power during operation.
• Be sure to open and close all machine covers gently.

Consumables

Important!:
• For ink and master Roll, it is recommended to use the products specified by RISO.
• Store consumables such as master Roll and ink properly.
Do not store consumables in the following places:
– Locations that are subject to direct sunlight or bright locations that are close to windows
(If there is no other choice, curtain the window.)
– Locations that are subject to rapid changes in temperature
– Extremely hot and humid locations or extremely cold and dry locations

Ink Handling

B
Caution:
• If ink gets into your eyes, flush it out immediately with plenty of water. If irritation continues, seek medical attention.
• If ink comes into contact with your skin, wash it off thoroughly using soap.
• If someone swallows ink by mistake, force large quantities of water (or milk) without inducing vomiting, and watch
his/her condition.
• Allow plenty of ventilation during printing.
• If you feel unwell during use, seek medical advice.
• Only use the ink for printing purposes.
• Keep the ink out of the reach of children.
Location of
This machine has a
Follow the indication of the label and use the machine safely.
Caution Label
caution label meant to ensure safe operation.
Basic Operations
Safety Guide - Handling and Operation
27