Setting The Id Counter Report Reminder - Riso EZ Series User Manual

REG-LL_EN.book Page 85 Wednesday, September 14, 2011 12:03 PM

Setting the ID Counter Report Reminder

If the counting result is output regularly on a specific day of the month, set that day as the reminder date. The "idcc"
is displayed and the alarm sounds on the set date each month.
Important!:
• The administrator must be registered in advance in the "Create User". ( p.78)
Note:
• To use the feature of ID Counter Report, the optional RISO PC Interface Card USB2.0 is required. In addition, the
optional RISO Network Card is also required to output the report from E-mail.
• You can select for the counting date from a range 1 to 31. Select "0" to set no counting date.
• When setting the reminder date between the 29th - 31st, and if the number of days in the month is less than this
range such as in February, the "idcc" is displayed on the last day of the month.
1
Press the
number "88".
2
Press the [
The current setting flashes. "0" displayed if noth-
ing has been set.
3
Enter the counting date using the
Print Quantity keys.
key and enter the item
] key.
4
Press the [ ] key.
The counting date is applied, and the item number
entry mode is restored.
Important!:
• If you press the key before pressing the
[ ] key, the setting is canceled and the nor-
mal mode is restored.
• If you press the key before pressing the
[ ] key, the setting is applied and the normal
mode is restored.
Note:
• On the counting date, turning on the power
sounds the alarm and displays "idcc." Output
the counting result. p.86
• Alternatively, perform "ID Counter Report
Monthly Reminder (stop)" (item number:89) if
you do not output for the current month; "idcc"
does not appear until the counting date of the
following month. p.71
Setting Up User Management
Advanced Features
85