REMOVING THE SKATE PLATE AND SUSPENSION PADS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug washer or disconnect power.
2.
Tilt the cabinet forward and remove it
(see page 4-5 for the procedure).
3.
Remove the outer tub (see pages 4-16
and 4-17 for the procedure).
Skate Plate
4.
Lift the skate plate off the base assem-
bly.
5.
Pry the three suspension pads off the top of
the washer base assembly and replace the
pads.
Pry Off Suspension Pads
Skate Plate
4-19
Washer Base